FT24C512A-UDR-B【PDF 6/17 页】IC EEPROM 512KBIT 1MHZ 8DIP

您好，
买卖IC网欢迎您。
请登录
免费注册

2页 3页 4页 5页 [6页]7页 8页 9页 10页

FT24C512/A

READ OPERATIONS

The read command is similar to the write command except the 8 th read/write bit in address word is set to

“1”. The three read operation modes are described as follows:

(A)

(B)

(C)

CURRENT ADDRESS READ

The EEPROM internal address word counter maintains the last read or write address plus one if the

power supply to the device has not been cut off. To initiate a current address read operation, the

micro-controller issues a START bit and a valid device address word with the read/write bit (8 th ) set to

“1”. The EEPROM will response with an ACKNOWLEDGE signal on the 9 th serial clock cycle. An 8-

bit data word will then be serially clocked out. The internal address word counter will then

automatically increase by one. For current address read the micro-controller will not issue an

ACKNOWLEDGE signal on the 18 th clock cycle. The micro-controller issues a valid STOP bit after

the 18 th clock cycle to terminate the read operation. The device then returns to STANDBY mode (see

Figure 7).

SEQUENTIAL READ

The sequential read is very similar to current address read. The micro-controller issues a START bit

and a valid device address word with read/write bit (8 th ) set to “1”. The EEPROM will response with

an ACKNOWLEDGE signal on the 9 th serial clock cycle. An 8-bit data word will then be serially

clocked out. Meanwhile the internally address word counter will then automatically increase by one.

Unlike current address read, the micro-controller sends an ACKNOWLEDGE signal on the 18th clock

cycle signaling the EEPROM device that it wants another byte of data. Upon receiving the

ACKNOWLEDGE signal, the EEPROM will serially clocked out an 8-bit data word based on the

incremented internal address counter. If the micro-controller needs another data, it sends out an

ACKNOWLEDGE signal on the 27 th clock cycle. Another 8-bit data word will then be serially clocked

out. This sequential read continues as long as the micro-controller sends an ACKNOWLEDGE signal

after receiving a new data word. When the internal address counter reaches its maximum valid

address, it rolls over to the beginning of the memory array address. Similar to current address read,

the micro-controller can terminate the sequential read by not acknowledging the last data word

received, but sending a STOP bit afterwards instead (figure 8).

RANDOM READ

Random read is a two-steps process. The first step is to initialize the internal address counter with a

target read address using a “dummy write” instruction. The second step is a current address read.

To initialize the internal address counter with a target read address, the micro-controller issues a

START bit first, follows by a valid device address with the read/write bit (8 th ) set to “0”. The EEPROM

will then acknowledge. The micro-controller will then send two address words. Again the EEPROM

will acknowledge. Instead of sending a valid written data to the EEPROM, the micro-controller

performs a current address read instruction to read the data. Note that once a START bit is issued,

the EEPROM will reset the internal programming process and continue to execute the new instruction

- which is to read the current address (figure 9).

DS3009E-page 6

? 2009 Fremont Micro Devices Inc.

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

我的联系方式

*

*

*

相关PDF资料

FT24C64A-UMR-B IC EEPROM 64KBIT 1MHZ 8MSOP

FT822AA IC LED DRVR PFC LOW TDH 8SOP

FT881A IC LED DRVR 30W 8SOP

FT93C46A-ITR-B IC EEPROM 1KBIT 2MHZ 8TSSOP

G3TB-IAZR02P-US AC100-240 INPUT MODULE AC 5MA 4-32VDC

G3TC-OAC24A DC24 OUTPUT MODULE AC STD 18MA 24VDC

GENH/RM KIT RACK MOUNT

GJ026-6P6C12 PHONE JACK GANGED 6 POS PCB

相关代理商/技术参数

FT24C512A-USG-B 功能描述:IC EEPROM 512KBIT 1MHZ 8SOP RoHS:是类别:集成电路 (IC) >> 存储器系列:- 标准包装:96 系列:- 格式 - 存储器:闪存存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽）供应商设备封装:48-TSOP 包装:托盘

FT24C512A-USG-T 功能描述:IC EEPROM 512KBIT 1MHZ 8SOP RoHS:是类别:集成电路 (IC) >> 存储器系列:- 标准包装:96 系列:- 格式 - 存储器:闪存存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽）供应商设备封装:48-TSOP 包装:托盘

FT24C512A-USR-B 功能描述:IC EEPROM 512KBIT 1MHZ 8SOP RoHS:是类别:集成电路 (IC) >> 存储器系列:- 标准包装:96 系列:- 格式 - 存储器:闪存存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽）供应商设备封装:48-TSOP 包装:托盘

FT24C512A-USR-T 功能描述:IC EEPROM 512KBIT 1MHZ 8SOP RoHS:是类别:集成电路 (IC) >> 存储器系列:- 标准包装:96 系列:- 格式 - 存储器:闪存存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽）供应商设备封装:48-TSOP 包装:托盘

FT24C512A-UTG-B 功能描述:IC EEPROM 512KBIT 1MHZ 8TSSOP RoHS:是类别:集成电路 (IC) >> 存储器系列:- 标准包装:96 系列:- 格式 - 存储器:闪存存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽）供应商设备封装:48-TSOP 包装:托盘

FT24C512A-UTG-T 功能描述:IC EEPROM 512KBIT 1MHZ 8TSSOP RoHS:是类别:集成电路 (IC) >> 存储器系列:- 标准包装:96 系列:- 格式 - 存储器:闪存存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽）供应商设备封装:48-TSOP 包装:托盘

FT24C512A-UTR-B 功能描述:IC EEPROM 512KBIT 1MHZ 8TSSOP RoHS:是类别:集成电路 (IC) >> 存储器系列:- 标准包装:96 系列:- 格式 - 存储器:闪存存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽）供应商设备封装:48-TSOP 包装:托盘

FT24C512A-UTR-T 功能描述:IC EEPROM 512KBIT 1MHZ 8TSSOP RoHS:是类别:集成电路 (IC) >> 存储器系列:- 标准包装:96 系列:- 格式 - 存储器:闪存存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽）供应商设备封装:48-TSOP 包装:托盘